800ml Car Headlight Restoration Liquid Polymer Kit

This Car Headlight Restoration Kit is designed to help restore the appearance and clarity of faded, yellowed, scratched, oxidised or hazy vehicle headlight lenses.

The restoration process combines six grades of wet sanding with a heated liquid polymer treatment. The progressive sanding process prepares the lens surface, while the polymer treatment helps improve transparency and restore a brighter, clearer appearance.

The kit includes an 800ml supply of restoration liquid and a stainless steel evaporation cup designed for rapid heating during the treatment process.

Headlight Restoration

The treatment is designed for common forms of headlight lens deterioration and surface damage.

• Yellowing: Helps restore the appearance of discoloured lenses
• Oxidation: Helps remove oxidised surface material
• Hazing: Helps improve cloudy or blurred lens appearance
• Scratches: Sanding helps address surface scratches and imperfections
• Peeling: Suitable for headlights affected by surface deterioration
• Clarity: Helps improve the transparency and appearance of the lens
• Shine: Designed to restore a cleaner and brighter finish

Six-Stage Wet Sanding

Thorough surface preparation is an essential part of the restoration process. The kit includes six grades of sandpaper for progressively refining the headlight surface.

• 180 Grit: Initial surface preparation
• 240 Grit: Progressive smoothing
• 360 Grit: Further removal of surface imperfections
• 600 Grit: Refinement of the lens surface
• 800 Grit: Further smoothing before final preparation
• 1200 Grit: Final sanding stage
• Wet Sanding: Use water throughout the sanding process
• Cross Sanding: Change sanding direction between stages to help remove previous sanding marks

Liquid Polymer Treatment

Following sanding and cleaning, the restoration liquid is applied using a heated evaporation and fumigation process.

• Liquid Volume: 800ml
• Application Method: Heated evaporation / fumigation
• Evaporation Cup: Stainless steel construction
• Fill Level: Approximately one-third of the cup
• Heating Time: Approximately 5–10 minutes
• Surface Finish: Designed to improve lens transparency and appearance
• Adhesion: Manufacturer describes the polymer as having strong adhesion

Easy Restoration Process

Step 1: Inspect the Headlight

Check the lens for yellowing, oxidation, hazing, crazing, peeling and scratches.

Step 2: Protect the Surrounding Area

Work in a clean, dry and wind-free environment. Cover the paintwork and trim surrounding the headlight with protective film.

Step 3: Sand the Lens

Wet sand progressively using 180, 240, 360, 600, 800 and 1200 grit sandpaper. Use water and cross-sand between stages until the original gloss has been removed evenly across the entire lens.

Step 4: Clean & Dry

Wash the lens thoroughly after sanding and dry it completely with a clean towel.

Step 5: Heat the Restoration Liquid

Pour the liquid into approximately one-third of the evaporation cup. Heat the cup for approximately 5–10 minutes according to the manufacturer's instructions.

Step 6: Apply the Treatment

Direct the generated vapour evenly across the prepared headlight surface. Once treatment is complete, disconnect the equipment and allow the lens to finish as instructed.

Stainless Steel Evaporation Cup

The included evaporation cup is designed to heat the restoration liquid efficiently during application.

• Material: Stainless steel
• Heating: Designed for rapid heating
• Application: Liquid polymer evaporation
• Capacity: Fill to approximately one-third during use
• Purpose: Generates vapour for treating the prepared headlight surface

Suitable Applications

• Automotive Headlights: Designed for vehicle headlight lens restoration
• Yellowed Lenses: Helps improve the appearance of yellowed surfaces
• Oxidised Lenses: Suitable for oxidised headlight surfaces
• Hazy Lenses: Helps restore clearer lens appearance
• Scratched Lenses: Can address suitable surface scratches through sanding
• Peeling Surfaces: Suitable for certain surface deterioration
• Newer Headlights: Manufacturer states it can also be used for maintenance and protection

Safety & Features

• 800ml Restoration Liquid: Large-volume supply for headlight restoration applications
• Six Sandpaper Grades: 180 through 1200 grit for progressive surface preparation
• Heated Polymer Treatment: Uses evaporation and fumigation after sanding
• Stainless Steel Cup: Designed for rapid heating
• Headlight Clarity: Helps improve the appearance and transparency of treated lenses
• Scratch Treatment: Sanding process helps remove suitable surface imperfections
• All-in-One Kit: Combines surface preparation and polymer treatment
• Automotive Application: Designed specifically for headlight lens restoration

Specifications

Package Includes

• 1 × 800ml Headlight Restoration Liquid
• 1 × Stainless Steel Evaporation Cup
• 1 × Set of 6 Sandpaper Grades

Important Notes

• Surface preparation is essential. The headlight should be thoroughly sanded before applying the polymer treatment.
• Always protect surrounding paintwork and trim before sanding.
• Use water during the sanding process as instructed.
• Ensure the lens is thoroughly cleaned and completely dry before polymer application.
• Fill the evaporation cup to approximately one-third capacity.
• Follow the manufacturer's heating and application instructions carefully.
• Use appropriate personal protective equipment when sanding and handling the restoration liquid.
• Ensure adequate ventilation during the treatment process.
• Keep the heated equipment and restoration liquid away from open flames and other ignition sources.
• Results vary depending on the condition and severity of the headlight damage.
• The product is intended for suitable surface-level deterioration and may not repair deep cracks, structural damage or damage extending through the lens.
• The restoration liquid may be subject to shipping or customs restrictions in certain destinations.